Product information

Towel warmer in black for 20-30 compresses (capacity 10.6 l). Separately switchable UV light sterilizer to keep towels sterile. Consistent heat at 80 °C +/-10 °C. Seamless, corrosion-resistant aluminum inner chamber. Wire basket for easy insertion of towels. Separate drip tray for collecting condensate. Power consumption: 200 W.

Delivery contents
Towel warmer with collection container for condensate and wire basket, operating instructions
Properties
Manufacturer EFALOCK
Category ELECTRICAL APPLIANCES
Subcategory OTHER
Product number 14102164
Product name GENTLE HEAT
Product designation Towel warmer
EAN 4025341512650
Contact info@efalock.de
Technical information
colour black
cord type Mains cable
frequency range (Hz) 50 Hz
mains / battery operation Mains operation
on/off switch yes
operating voltage (V) 220-240 V
power (W) 200 W
width 46 cm
depth 36 cm
length 31 cm
Contents (pcs.) 1
Usage manual

Usage manuals for download

USE INSTRUCTIONS
Make sure the unit is properly connected.
1. Place the damp and rolled towels on the grid in the towel warmer and close the door. Only good, properly wrung out, slightly damp towels may go into the unit, otherwise the warranty will be voided.
2. Press the on/off button for the heating function to turn the unit on. An indicator will light up to show that the unit is heating up. Once the appropriate temperature is reached in the towel warmer, it will be maintained automatically. If the temperature in the towel warmer drops, it will begin heating again.
3. Press the on/off button for the UV function to activate the sterilizer.
4. Turn off the towel warmer before removing the towels. The indicator light will turn off and the door of the unit can be opened. Use tongs to remove the towels from the unit and keep your distance to avoid any risk of burns.
5. When heating the wet towels, water vapor is generated. This is collected by the collection container for water (E). Empty it after each use.
Place the towel warmer in a stable and dry place and away from explosive or flammable objects. Make sure there is a distance of about 30 cm between the towel warmer and a wall.
Before placing towels in the towel warmer, wet them and wring them out.
To avoid accidents, do not place flammable or explosive objects in the towel warmer.
 

CLEANING THE UNIT:
- Be sure to unplug the unit before cleaning and wait for the unit to cool properly.
- Clean the unit with a neutral, acid-free and non-corrosive care product.
- Then clean it with a soft cloth.
- Remove the water collection container, empty it and let it dry.
 

Replacing the UV lamp:
- Be sure to unplug the unit before replacing the lamp, and wait for the unit to cool properly.
- Unscrew the UV lamp and replace it with a new compatible UV lamp E17, 3W, wavelength 240nm.
 

FUNCTIONAL TROUBLESHOOTING:
- Excessive moisture in the towel warmer or towels that do not get warm are generally caused by towels that are too damp. Be sure to wring them out well before placing them in the towel dryer.
- If the door closes poorly or steam escapes from the towel warmer, check to make sure the door seal is properly seated. Apply pressure to the door to ensure proper fit of the gasket in the groove of the door.

Compliance

Download declaration of conformity

General warnings

ImPORTANT SAFETY INSTRUCTIONS:
When using electrical equipment, especially in the presence of children, basic safety precautions,
particularly the following, must always be observed:
- READ ALL INSTRUCTIONS BEFORE USE.
- AVOID ANY CONTACT WITH WATER.
 

DANGER:
As with most electrical equipment, electrical components are live even when the switch is off.
-To reduce the risks of a fatal electric shock accident:
- Always unplug the appliance immediately after use.
- Do not use during a bath.
- Do not place or place the appliance anywhere where it could fall into a bathtub or sink.
- Do not place or drop into water or any other liquid.
- If the appliance falls into the water, unplug it immediately.
- Do not reach into the water with your hands to retrieve the appliance.
 

WARNING:
-To reduce the risk of burns, fatal electric shock, fire or injury:
- Never leave the appliance unattended when plugged in.
- Close supervision is required when the appliance is used by, with or near children or by persons suffering from certain disabilities.
- Use this appliance only for its intended purpose as described in this manual. Do not use accessories that are not recommended by the manufacturer.
- Never operate this appliance if its power cord is damaged, if it is not working properly, if it has been dropped or damaged in any way, or if it has been dropped into water.
- Never block the air vents of the appliance or place it on a soft surface, such as a bed or sofa, where the air intakes may be blocked. Keep the air vents free of hair, lint or the like.
- Keep the cord away from hot or glowing surfaces. Do not wrap the power cord around the unit.
- Do not operate it while sleeping.
- Never allow an object to fall or enter an opening or hose.

 

- It is important to take precautions if a lamp containing mercury breaks, as mercury can pose a health hazard. Ventilate the room and Avoid contact with mercury when the lamp breaks. Put on rubber gloves to protect hands from splinters or direct contact
- Pack and transport the old lamp to the disposal site safely if you have changed the UV lamp.
- The UV radiation from the UV lamp is harmful to health and can cause eye damage, skin damage and other health problems. Avoid direct contact with the UV rays and use the lamp according to the instructions.
- Air quality: avoid inhaling fumes or vapors that may be generated by the operation of the UV sterilization lamp to avoid health problems. Make sure there is adequate ventilation when using the lamp.
 

CONSUMER INFORMATION:

The UV lamps contain mercury and other hazardous substances that must be disposed of properly. According to Directive 2012/19/EU, when the lamp reaches the end of its life cycle, it must be disposed of in accordance with the regulations. Do not dispose of the lamp with household waste, but hand it in at a collection point for electronic waste or at an authorized disposal company. Please follow the instructions of your local waste disposal company and dispose of UV lamps safely to avoid environmental and health risks.


Packaging:
Your device is in protective packaging to prevent it from being damaged during transportation. The packaging is made of materials that can be disposed of ecologically and sent to a suitable recycling service.
 

Device:
Waste equipment must not be disposed of with household waste. In accordance with Directive 2012/19/EU, the
device must be disposed of in accordance with the regulations when it reaches the end of its life cycle. The recyclable materials contained in the
device are then reused, which enables the
environment to be protected. Hand in the old device at a collection point for electrical and electronic waste
or at a recycling center. For more information, contact a recycling company on
site or your local municipality.

More information about the product in the catalogue