- mains/battery operation
- operating time: up to 360 min. | Charging time: 180 min.
- motor: 5 speed settings
- titanium cutting setwith stainless steel blade and quick-change system
- cut length setting: 1.0; 1.3; 1.6; 1.9 mm
- display: LED indicator for speed, charge level, oil status, mains operation
- accessories: 2 comb attachments (3-6, 9-12 mm), cleaning brush, oil, power supply, charging station
- Packaging content: 1 piece(s)
The NXC pro hair clipper offers a very high cutting performance thanks to the high motor speed and holds with 5 speed levels and various cutting length settings individual adjustment options. At the same time, the hair clipper remains extremely smooth running and low vibration: the innovative SHELL TECHNOLOGY double-insulates the motor, which greatly reduces vibrations. In addition, the special COOL BLADE stainless steel blade ensures reduced heat generation and is therefore particularly user-friendly. With a cordless operating time of up to 5h, the NXC pro is perfect for professional use.
Features:
- Mains/battery operation
- Operating time: up to 360 min.
- Charge time: 180 min.
- Motor: 5 speed levels from 5000-7000 rpm, constant speed regardless of charge status
- Titanium cutting set with stainless steel blades and quick-change system
- Cutting head width: 45 mm
- Cutting length setting: 1.0; 1.3; 1.6; 1.9 mm
- Handling: ergonomic, extra quiet (<69 dB)
- DIAMOND-GRIP on the sides
- Display: LED display for speed, charge level, oil status, mains operation
- Weight: 251 g
- Mains operation: 100-240 V | 50-60 Hz
- Power: 6.5 W
- Accessories: 2 comb attachments (3-6, 9-12 mm), cleaning brush, oil, mains adapter, charging station
battery included in delivery | 3.7 V - 3000 mAh Samsung |
---|---|
battery model | Li-ion battery |
battery operation | yes |
charging time (h) | 3 h |
charging time (min) | 180 min. |
colour | black |
cord type | Mains cable |
cutting blade | Titanium cutting set with stainless steel blade, quick-change system |
cutting length (mm) | 1,0; 1,3; 1,6; 1,9 mm |
frequency range (Hz) | 50-60 Hz |
mains / battery operation | Mains and battery operation |
motor | 5000-7000 rpm. |
on/off switch | yes |
operating time (h) | 5 h |
operating time (min) | 360 min. |
operating voltage (V) | 100-240 V |
power (W) | 6,5 W |
weight without cable (g) | 251 g |
with display | yes |
width | 4,6 cm |
depth | 5,0 cm |
length | 19 cm |
Contents (pcs.) | 1 |
weight | 251 g |
Usage manuals for download
Using the device
Description
1. blade
2. slider
3. on/off switch
4. speed setting
5. LED display
- speed indicator
- battery is fully charged
- battery level indicator
- mains operation
- maintenance indicator
6. Accessories:
- Comb attachment 3-6 mm
- Comb attachment 9-12 mm
- Cleaning brush
- Oil bottle
7. Charging station Power supply
Charging the battery
In this device, there is a lithium-ion battery. When the unit is shipped
it is not yet ready for battery operation. Fully charge the unit before
the first use. After a few charging cycles, the battery
first reaches its full capacity. After the first charge, the device
can be used wirelessly.
Charging with the charging station:
1. Make sure the charging station is on a level surface. Insert
the adapter into the charging cradle.
2. Insert the adapter into a working electrical outlet.
3. Insert the powered-off device into the charging cradle.
To charge the device without the charging cradle, use the included
mains adapter.
▷Place the power adapter cord so that no one will trip over it.
▷Keep the power cord away from hot surfaces.
Cut Length Adjustment
Cutting Head:
Use the slider (2) to
change the length of the cut. The following cut length settings are available: 1.0; 1.3; 1.6 ; 1.9 mm.
Plug-on comb:
Slide the comb attachment into the notches located on both sides of the
cutting head until it reaches a fixed
position. To remove, press on
either side of the comb attachment from the front.
Switching the unit on and off
Press the on/off switch (3).
LED indicator
Speed settings:
There are 5 speed settings (4). Depending on the level selected, the
U/min and run time will vary as shown in the table.
Speed setting 1 2 3 4 5
U/min 5000 5500 6000 6500 7000
Battery level indicator:
▷ Check the battery level before each use. Charge the battery when
low before each use.
Icon illuminates: Battery is fully charged
Symbol flashing: Battery is charging
Symbol is lit: Battery charge level is low
Icon flashing: Battery is charging
Icon is lit: Battery is charging
Icon lit: Cleaning and oiling
CLEANING, CARE, MAINTENANCE
▷ Before maintenance, turn off the power and disconnect the unit from
power.
Cleaning the unit
Wipe the unit occasionally with a damp (not wet) cloth.
Then dry with a clean cloth.
Cleaning the cutting head
Removing the cutting head:
Hold the hair clipper with one hand facing
up and push down the blade with your thumb as shown in the figure
above (1)
. Take the blade in the other hand to prevent it from
falling down.
Maintaining the clipper head:
Press and hold the top of the blade (1). Use the
cleaning brush to remove hair from between the top blades. Keep
the hair clipper tilted towards the floor to prevent oil from running into
the motor. Use 1-2 drops of lubricating oil at the points
shown in the figure (3)
.
Inserting the cutting head:
Hold the hair clipper with one hand facing
down and place the bottom of the blade so that its center fits against the
hair clipper. Press the front of the blade down
until it clicks into place (4).
Storage
If you will not be using the unit for an extended period of time, store it only in a charged
state. It should be stored in a cool and dry place. Make sure
that the device is protected from dust and other environmental influences.
Protection of the environment provided.
ImPORTANT SAFETY INSTRUCTIONS:
Before using the NXCpro hair clipper,
check that the
appliance's amperage setting matches the outlet. When using
electrical equipment - especially when children are in the
proximity - basic safety precautions must
be observed.
Intended use: The device must
be used exclusively for cutting human hair
. The device is designed for indoor use only. The appliance is designed for
professional use in a hair salon.
All safety instructions should be read carefully before
use.
CAUTION!
Electrical shock:
- Unplug the appliance after use.
- Keep the appliance away from moisture, water and
other liquids.
- Do not use the device in the bathtub, in the shower,
over a sink filled with water, or with
wet hands.
- Do not submerge or rinse
the device under water.
- Do not use the device if it has fallen into
water. Do not touch an appliance that has come into
contact with water - unplug it immediately.
- For cleaning, care and maintenance, the appliance must be disconnected from
the mains.
- If an
error occurs during charging or corded operation, disconnect the appliance from the mains immediately.
- Do not use the appliance if the
hair clipper, cutting head, battery,
charging base or connecting cord are damaged.
Disconnect the appliance from the mains immediately and inform
EFALOCK customer service.
WARNING:
Do not use this appliance near bathtubs,
washbasins or other vessels,
that contain water.
CAUTION!
Risk of injury from cutting head:
- Do not reach into or
at the
cutting head when the unit is turned on.
- Turn off the unit when you
put it out of your hand or when you attach or
remove a comb attachment.
Swallowing of small parts:
- Keep the device out of reach of children.
- Also keep the packaging material, such as foils
away from children.
Property damage:
- The device may only be operated
with the original power supply.
- Do not expose the device to temperatures
below 0°C or above 40°C for a longer period of time.
- Avoid direct sunlight.
- The device may not be used for other purposes.
- Repairs may only be carried out by an authorized
customer service.
- Do not use spare parts that are not
recommended or sold by the seller.
- Protect the connecting cable from damage.
Never pull on the connecting cable.
- Never leave the cable coiled up while
you have the device in use so that there is no
heat generation.
- The cutting head is a precision part. Protect it
from damage.
- Do not disassemble the cutting head.
- Never try to remove dust and foreign objects from inside the device with a
pointed object.
- Protect the device, especially the cutting head
from dust exposure.
- Store the device properly and protect
the device during transportation in a means of transportation suitable for Li-ion batteries
.
NOTICE!
- Persons (including children) who, because of their
physical, sensory or mental capabilities or
their inexperience or lack of knowledge, are unable to use
the device safely should not
use this device without supervision or instruction by a responsible
person. Children should be supervised to
ensure that they do not play with the appliance.
NOTE!
For additional protection, installation of a
fault current protective device (RCD) with a
rated tripping current of not more than 30 mA in the
bathroom circuit is recommended. Ask your
installer for advice.
DISPOSAL
This appliance is marked in accordance with Directive 2002/96/EC on waste electrical and
electronic equipment (WEEE). This electrical appliance
may not be disposed of
in the residual waste garbage can at the end of its life, but must be taken to a collection point for the recycling of
electronic equipment. This also applies to electrical equipment that
was last used in the non-private sector, but e.g. in trade or craft,
. Insofar as the acceptance of non-privately used electrical appliances
has been excluded by the responsible local public disposal
facilities, their waste advice center will provide information on
environmentally sound disposal.
The symbol on the product, the operating instructions or the packaging
indicates this. The materials are recyclable according to their labeling
. Reuse, material recycling or
other forms of recycling of old equipment make an important contribution to
SPARE PARTS
Use only original spare parts, which can be
ordered from the EFALOCK service partner.
EXPLANATION OF SYMBOLS ON THE POWER SUPPLY
- Protection class II symbol: Equipment with protection class II has
reinforced or double insulation
- House symbol: The device is designed for indoor use only
.