SYNFONIA
high speed hair dryer
Dries in record time, incredibly quiet, superpower & featherlight!
Features:
- digital high-speed brushless motor: 110,000 rpm.
- lifetime of 10.000 h
- power: 1800 W
- integrated silencer
- ion technology
- featherweight: 350 g
- 4 temperature and 4 blower settings, cold air button
- lock setting function
- digital display indicator
- automatic self-cleaning function
- removable filter attachment
- 3 m professional cord
- mains power: 220-240 V | 50-60 Hz
- accessories: magnetic ondulating nozzles (6.5 cm; 7.5 cm) and diffuser, cleaning brush
- Packaging content: 1 piece(s)
DRY IN HARMONY LIKE A SYMPHONY!
IN STAGE: SUPER FAST & POWERFUL
The high-speed brushless motor runs at up to 110,000 rpm and produces a powerful, ionized airflow for precise and fast hair drying. The advantage, strong heat is not necessary.
INCLUSION: LIGHTNESS & LOUDNESS
Designed for professional and intensive use. The feather-light weight of 350 g significantly reduces stress on joints and muscles. The built-in silencer ensures pleasant acoustics.
TOGETHER: SMART & DIGITAL
Each hair is individual and requires specially adapted temperature and airflow settings. With the 4 heating and 4 blower levels, the right setting can be made for every hair texture, precisely shown in the digital display and locked in place by pressing the lock button. Thanks to the smart self-cleaning function, a service life of up to 10,000 h can be achieved.
THE RESULT: HEALTHY SHINY HAIR FULL OF VIBRITY AND ENERGY IN RECORD TIME!
Features:
- digital high-speed brushless motor: 110,000 rpm with a lifetime of 10,000 h
- power: 1800 W
- integrated silencer for pleasant acoustics and reduced noise level (approx. 70 dB)
- ion technology
- light weight: 350 g
- 4 temperature and 4 blower levels
- cold air button: instant cold air burst for styling fixation
- lock setting function
- digital display indicator
- automatic self-cleaning function
- removable filter attachment
- 3 m professional cord
- mains power: 220-240 V | 50-60 Hz
- accessories: magnetic attachments: Ondulating nozzles (6.5 cm; 7.5 cm) and diffuser, cleaning brush
| Air flow rate (l/sec) | 19,25 l/sek |
|---|---|
| air speed settings | 4 |
| cold shot button | ja |
| colour | black-gunmetal |
| cord length (m) | 3 m |
| cord type | Mains cable |
| frequency range (Hz) | 50-60 Hz |
| mains / battery operation | Mains operation |
| motor | digital high speed brushless motor |
| on/off switch | ja |
| operating voltage (V) | 220-240 V |
| overheating protection | ja |
| power (W) | 1800 W |
| revolutions/minute | 110.000 U/min. |
| temperature levels | 4 |
| volume (dB) | ca. 70 dB |
| weight without cable (g) | 350 g |
| with display | ja |
| Contents (pcs.) | 1 |
| weight | 350 g |
Usage manuals for download
Description:
1. on/off switch: I: turn on; lock buttons; 0: turn off
2. air speed setting: (4 settings: soft, light, medium, strong); buttons: + increase/decrease
3. Temperature settings: (4 settings: 60°, 80°, 100°, 120° C); buttons: + increase/decrease
4. COOL SHOT cold button
9. Air outlet with magnetic nozzle attachment
7. Magnetic attachments
8. Cleaning brush with hook on handle to remove protective filter
5. Protective filter removable using hook on cleaning brush handle
6. Display Indication: Air speed, Ion function active, Temperature in °C
▷ Make sure your hands are completely dry before connecting the unit to
the mains.
1. Move the on/off switch from 0 to I. (In Fig. to 1.)
2. Settings: The display shows which settings you are using (in fig. item 6)
a ) Set air speed with keys +/- (in fig. to 2.) gentle light medium strong
b) Set temperature with keys +/- (in fig. to 3.) 60 °C 80 °C 100 °C 120 °C
3. Lock function: after setting the desired temperature and airflow speed, the selector keys can be locked. To do this, slide the slider to (in fig. to 1.) The cold air function continues to work. (in fig. to 4.)
4. Cold air function: press and hold the COLD SHOT button (in fig. to 4.) To disable it, release the button. When the cold air function is active, the hair dryer blows cold air regardless of the temperature setting.
5. Magnetic attachments (in Fig. to 7.): The attachments hold magnetically and can be easily clipped on (in fig. to 6.). Change attachments only when cooled.
CLEANING, CARE & MAINTENANCE
▷ Before maintenance, turn off the unit and disconnect it from
power. Clean only when cooled down!
Regular filter cleaning:
▷ CAUTION: The high performance motor is protected by the air inlet filter (in Fig. to
5.). It is therefore absolutely necessary to clean the filter immediately when cleaning indicator 888 appears in the display. This is the only way to protect the motor, maintain correct operation of the unit and guarantee a long service life. The accumulation of dirt due to improper cleaning of the filter can cause damage to the motor!
Cleaning indicator:
After 40 h of use, 888 lights up in the display. This is the indication that the filter must be cleaned immediately.
Manual filter cleaning:
1. Remove the filter cover: to do this, use the hook from the handle of the supplied cleaning brush (in fig. to 8.) to carefully pull out the grille of the filter cover.
2. Clean the filter with the supplied cleaning brush.Automatic self-cleaning:
1. Press the COOL SHOT cold air button for a long time (about 5 sec.) to activate the self-cleaning function (in fig. to 4.). The hair dryer blows air in the opposite direction through the filter. Make sure that the air inlet and outlet are free of obstructions for this purpose.
2. The self-cleaning process takes 10 seconds. The display will show a countdown from 10 - 0.
3. At the end of the cleaning process, replace the filter cover on the
protective filter. The filter attachment snaps into place magnetically.
Storage:
Make sure that the device is protected from dust and other environmental influences.
SPARE PARTS
Use only original spare parts, which can be ordered from the EFALOCK service partner.
IMPORTANT SAFETY INSTRUCTIONS:
▷ All safety instructions should be read carefully before use.
▷ Before using the appliance, check that the appliance's amperage setting matches the power outlet. When using electrical equipment - especially when children are around - basic safety precautions must be observed.
▷ Intended use: This appliance is suitable for drying human hair only.
▷ The appliance is designed for indoor use only and has been developed for professional use in hairdressing salons.
CAUTION!
Electrical shock:
- Unplug the appliance after use.
- Keep the appliance away from moisture, water and other liquids.
- Do not use the appliance in the bathtub, in the shower, over a sink filled with water, or with wet hands.
- Do not immerse the appliance in water or other liquids. Do not touch an appliance that has come into contact with water - unplug immediately.
- The appliance must be unplugged for cleaning, care and maintenance.
- Do not use the appliance if the connecting cable is damaged. Disconnect the appliance from the mains immediately and inform EFALOCK customer service.
WARNING:
Do not use this appliance near bathtubs, sinks or other vessels,
that contain water.
CAUTION!
Small parts may be swallowed:
- Keep the appliance out of reach of children. Also keep the packaging material, such as plastic film away from children.
SYNFONIA
Property damage and personal injury:
- Never leave the appliance unattended when it is turned on. Caring supervision is required,
when the appliance is used at / for / or near children or disabled persons.
- Do not misuse the appliance.
- Do not use any component parts not recommended or sold by the seller.
- Keep the power cord away from hot surfaces.
- Check the appliance frequently for damage, especially the cord and plug. If in doubt, have the unit checked by an authorized repair shop.
- If the unit is not working properly, has been dropped, damaged, or dropped into water, do not attempt to repair the unit yourself, take it to a service center.
- Repairs should only be made by an authorized service center.
- Never wrap the cord around the unit.
- Do not cover the air inlet. Clean the air inlet regularly to protect the unit from overheating. The unit is equipped with a safety thermostat. In case of
overheating (e.g. blocked air inlet), the unit switches off automatically. In this case, contact the customer service.
- The device generates heat during its use. If you find the set temperature too hot, set the temperature lower.
- Do not use hair spray while the appliance is on.
- Allow the appliance to cool after use.
NOTICE!
People (including children) who, because of their physical, sensory or mental capabilities, or because they are inexperienced or unfamiliar with the appliance, are unable to use it safely should not use this appliance without supervision or instruction by a responsible person. Children should be supervised to ensure that they do not play with the appliance.
NOTE!
For additional protection, it is recommended that a residual current device (RCD) with a tripping current rating of not more than 30 mA be installed in the bathroom circuit. Ask your installer for advice.
More information about the product in the catalogue
Spare parts
