- Long-life AC motor with 2000 W power
- Air flow rate: 28.5 l/sec.
- Volume: 71 dB
- 2 speed settings, 3 temperature settings, cold air button
- Overheating protection
- Accessories: 2 ondulating nozzles: 6 cm, 7 cm
- Packaging content: 1 piece(s)
Power hair dryer in elegant black. Equipped with a long-lasting AC motor with a powerful 2000 W output. Perfect air flow for fast, even drying with a powerful air flow rate of 32.5 l/sec.
Features:
- AC motor with a power output of 1500 W
- 2 speed settings, 3 temperature settings, cold air button
- Air flow rate: 32.5 l/sec.
- Loudness: 71 dB
- Overheating protection
- Removable air intake grille with cleaning filter
- Weight: 514 g
- Cable length: 2.8 m
- Mains operation: 220-240 V | 50-60 Hz
- Accessories: 2 ondulating nozzles: 6 cm and 7 cm
Air flow rate (l/sec) | 32,5 l/Sek. |
---|---|
air speed settings | 2 |
cold shot button | yes |
colour | black |
cord length (m) | 2,8 m |
cord type | Mains cable |
frequency range (Hz) | 50-60 |
mains / battery operation | Mains operation |
motor | AC motor |
on/off switch | yes |
operating voltage (V) | 220-240 V |
overheating protection | yes |
power (W) | 2000 W |
temperature levels | 3 |
volume (dB) | 71 dB |
weight without cable (g) | 514 g |
Contents (pcs.) | 1 |
weight | 514 g |
Usage manuals for download
HANDLING THE UNIT
Description:
1. power: OFF - 0 | level - 1 | level - 2
2. temperature: level 1-3
3. cold air button
4. air intake grille (removable)
6. Ondulating nozzles (6 cm, 7 cm)
5. Air outlet
Use instructions:
1. The hair dryer is ready for use by inserting the plug into the socket.
2. Switch on: Set the power setting switch (1) to the desired level (level I or II) and select desired temperature setting (2) (level I, II or III).
3. At each of the temperature and speed settings, you can also press the cold button.
4. Turn off: Set the step switch (1) to OFF - 0.
5. Let the unit cool down well after use.
▷ Place the power supply cord so that no one will trip over it.
▷ Keep the power cord away from hot surfaces.
CLEANING, CARE & MAINTENANCE
▷ Before maintenance, turn off the power and disconnect the
unit from the mains.
▷ Clean only when cooled down!
Cleaning the unit:
Wipe the unit with a damp (not wet) cloth. Make sure that no liquid enters the inside of the housing. Then dry with a clean cloth.
Check the air intake grille (4) regularly for dirt. If necessary: Clean the air intake grille (4) with a suitable brush or vacuum cleaner.
Storage:
Make sure that the device is
protected from dust and other environmental influences.
Spare parts:
Use only original spare parts, which you can order from the EFALOCK
service partner.