CLASSIC STYLE
Hair clippers
Extremely powerful & gentle to the skin!
- mains / battery operation
- Operating time: up to 300 min. | Charging time: 180 min.
- Motor: High Performance Rotary Motor with up to 6500 rpm.
- Cutting set: made of hard carbon steel, innovative with oil sump and ventilation holes
- Cutting length adjustment: 0.5 to 3.5 mm
- weight: 280 g
- Accessories: 6 magnetic comb attachments (1.5; 3; 4.5; 6; 10; 13 mm), cleaning brush, oil, power supply
- Packaging content: 1 piece(s)
Extremely powerful & gentle at the same time! With direct motor power to the blade the Classic Style Clipper is also suitable for extra thick and full hair and yet incredibly gentle to the skin. The high-performance battery achieves a cordless operating time of up to 5 hours.
Features:
- Mains / battery operation
- Battery: high-performance lithium Stage 3 battery without memory effect
- Operating time: up to 300 min.
- Charge time: 180 min.
- Motor: high Performance Rotary Motor with up to 6500 rpm. for high, efficient cutting performance
- Cutting set: made of hard carbon steel, innovative with oil sump and ventilation holes - for extra long life and reduced heat generation
- Cutting length adjustment: 0.5 to 3.5 mm
- Cutting head width: 45 mm
- Cutting width: 40 mm
- Handling: ergonomic & lightweight, low vibration, optimally balanced
- LED indicator during mains operation
- Weight: 280 g
- Mains operation: 220-240 V | 50-60 Hz
- Cable length: 1.5 m
- Accessories: 6 magnetic comb attachments (1.5; 3; 4.5; 6; 10; 13 mm), cleaning brush, oil, power adapter
| battery included in delivery | Lithium Stage-3 battery |
|---|---|
| battery model | high performance lithium stage 3 battery without memory effect |
| battery operation | ja |
| charging time (h) | 3 h |
| charging time (min) | 180 min. |
| colour | black |
| cord length (m) | 1,5 m |
| cord type | Mains cable |
| cutting blade | Carbon steel, innovative with oil sump and ventilation holes |
| cutting length (mm) | 0,5 - 3,5 mm |
| cutting width (mm) | 40 mm |
| frequency range (Hz) | 50-60 Hz |
| mains / battery operation | Mains and battery operation |
| motor | High Performance Rotary Motor: 6500 rpm. |
| on/off switch | ja |
| operating time (h) | 5 h |
| operating time (min) | 300 min. |
| operating voltage (V) | 220-240 V |
| weight without cable (g) | 280 g |
| Contents (pcs.) | 1 |
Usage manuals for download
Description:
1 Cutting head
2 Side lever to adjust the cutting head
3 ON/OFF switch
4 LED indicator (Blue/Red charging) (Green/Off is charging)
5 Combs (6 pieces: 1.5/3/4.5/6/10/13mm)
Use and charge the battery without charging station:
The device contains a lithium battery. When the device is shipped, it is not yet fully
charged. You should therefore fully charge the battery before using it for the first time. Before charging
make sure that the mains voltage matches the voltage
specified on the device. Connect the supplied adapter to the mains and then directly to the device. The battery will reach its full power capacity only after a few charging cycles.
During charging, a BLUE/RED indicator light will be on. When the battery is fully
charged, the light will go out or turn green.
Charging the battery while it is not yet (completely) empty will not affect the
performance of the device. However, we recommend that you fully discharge and then fully recharge the battery from time to time to extend the life of the battery. Lay the power cord so that no one can trip over it. Keep the cord, device and adapter away from hot surfaces.
Switching the device on and off
The device is switched on or off with the on/off switch. (2)
Adjusting the cutting length.
The cutting head can be adjusted
to different lengths using the side adjustment lever (2): 0.5/1.5/2.5/3.5 mm.
Adjusting the cutting length using attachment combs:
The attachment combs can be attached to the cutting head
for different cutting lengths. They are supplied with the unit in sizes 1.5/3/4.5/6/10/13 mm
. These are attached to the device using a magnet in the attachment comb.
Cleaning and care
To maintain the optimal cutting performance of the device, you should regularly maintain it the device.
It is best to clean and oil the device daily.
Turn off and unplug the unit.
Remove the comb attachment from the cutting head if it is being used.
Remove all hair and other debris with the brush provided.
Carefully remove the cutting head from the unit. (If possible) Oil the cutting head; if you use the unit regularly, we recommend that you do this before each use. Oil all parts of the cutting head that come into contact with each other. Use only the special oil supplied with the unit (do not dilute it, it does not hinder the running of the cutting head). Health hazard due to maintenance oil! Store the filled oil bottle out of reach of children. Do not swallow! Avoid eye contact. Dispose of empty.
You can use a slightly damp (not wet) cloth to clean the device housing.
Do not use aggressive or abrasive cleaning agents to clean the device.
If the cutting head picks up less hair after some time, you can
replace it with a new original cutting head (available as a spare part from EFALOCK).
Cleaning the cutting head/replacing the side lever and/or its stepless adjustment:
Step 1: Loosen the two screws counterclockwise and remove the
cutting blades. Leave the plastic part, including the spring, in place.
Step 2: Unscrew the right screw only. This will lock the nut so you
can unscrew the side lever screw without it turning.
Step 3: Remove the side lever screw by unscrewing it counterclockwise
and place it next to the unit.
Step 4: If you want to remove the click system so you can work continuously,
remove the part you see circled. Save this!
Step 5: Replace the side lever and make sure it is back to the
correct tension. Test this by
moving the side lever up and down. This varies from person to person, but make sure it is not too tight
or too loose.
Step 6: Now you can loosen the right screw again counterclockwise.
Step 7: Oil the blades where indicated.
Step 8: Replace the blades by tightening the screws clockwise.
Don't tighten them all the way yet, because you still need to check if the blade is straight and how
short it needs to be adjusted. Adjust the blades to be short and straight, and then tighten the
screws. Be sure to keep the blades straight!
Storage.
Store the unit in a charged state only if you
will not be using it for an extended period of time. Keep the device cool and dry and make sure that the device is protected from dust and
other environmental influences.
CAUTION!
Electrical shock:
- Unplug the appliance immediately after use.
- Keep the appliance away from moisture, water and other liquids.
- Do not use the appliance in the bath, in the shower, over a sink filled with water, or with wet hands.
- Do not immerse the appliance in water or other liquids. Do not touch an appliance that has come into contact with water - unplug immediately.
- The appliance must be unplugged for cleaning, care and maintenance.
- Do not use the appliance if the connecting cable is damaged. Disconnect the appliance from the mains immediately and inform EFALOCK customer service.
WARNING:
Do not use this appliance near bathtubs, sinks or other vessels containing
water. Ingestion of small parts:
- Keep the device out of reach of children. Also keep the packaging material, such as foils away from children.
Property damage and personal injury:
- Never leave the appliance unattended when it is turned on.
- Caring supervision is required when the appliance is used at /for /
or near children or disabled persons.
- Do not use replacement parts that are not recommended
or sold by the vendor.
- If the unit is not working properly, has been dropped,
damaged, or dropped into water, do
not attempt to repair the unit yourself. Repairs should only
be made by an authorized service center.
- Never allow the product to come into contact with chemicals, hair dye or hair
color.
- Never attempt to remove dust and foreign objects from inside the unit with a
pointed object.
- Keep the power cord away from hot surfaces.
CAUTION!
- There is a risk of injury from the cutting head.
- Before each use, check that the blades are aligned
and do not overlap to prevent injury.
- Never reach into the cutting head when the unit is
powered on.
- The cutting head is a precision part. Protect it from
damage and dust.
NOTES!
▷ Persons (including children) who, because of their physical, sensory
or mental capabilities, or lack of experience or knowledge, are unable
to use this appliance safely should not use this appliance without supervision
or instruction by a responsible person. Children should
be supervised to ensure that they do not play with the appliance.
▷ For additional protection, the installation of a residual current device
(RCD) with a rated trip current not exceeding 30 mA in the bathroom
circuit is recommended. Ask your installer for advice.
More information about the product in the catalogue
