VINTAGE STYLE

Hair trimmer

Powerful, handy, robust!

mains / battery operation
Operating time: up to 120 min. | Charging time: 90 min.
Motor: up to 6500 rpm, microprocessor control, overheating protection
easy Click - quick-change blade, professional cutting blade
ZERO blade - cutting length adjustment: 0.0 to 0.3 mm
Accessories: comb attachments (1, 2, 3 mm), cleaning brush, oil, power supply

Packaging content: 1 piece(s)

You are a hairdressing wholesaler? Login

You are a hairdresser? Find a distributor

Article number: 14102370

Product information

Powerful, handy & robust with noble aluminum housing! Specially designed for precise contouring of the beard, neck and ear area. The ZERO blade enables a cut close to the skin. With EASY CLICK quick-change blade.

Features:

Mains/battery operation
Battery: high-performance Lithium-Stage-1 battery without memory effect
Operating time: up to 120 min.
Charge time: 90 min.
Motor: up to 6500 rpm, microprocessor control: smooth running regardless of battery charge level - no overcharging of the battery, overheating protection
Cutting set: Easy Click - quick-change blade, professional cutting blade, extremely sharp, low wear, minimal heat generation
Cutting head width: 41 mm
Cutting width: 37 mm
ZERO BLADE - for close-to-skin cuts 0.0 mm, cutting length adjustment: 0.0 to 0.3 mm
Handling: ergonomic, low vibration, optimally balanced
LED indicator during mains operation
Weight: 173 g
Mains operation: 220-240 V | 50-60 Hz
Accessories: comb attachments (1, 2, 3 mm), cleaning brush, oil, power adapter

Delivery contents

Contour cutter, comb attachments (1, 2, 3 mm), cleaning brush, oil, power supply unit, operating manual

Properties

Brand	EFALOCK BARBER
Manufacturer	EFALOCK
Category	ELECTRICAL APPLIANCES
Subcategory	CLIPPER
Product number	14102370
Product name	VINTAGE STYLE
Product designation	Hair trimmer
EAN	4025341515934
Contact	info@efalock.de

Technical information

battery included in delivery	Lithium Stage 1 Battery
battery model	high performance lithium stage 1 battery without memory effect
battery operation	ja
charging time (h)	1,5 h
charging time (min)	90 min.
colour	chrome
cord length (m)	1,5 m
cord type	Mains cable
cutting blade	asy Click - quick change blade, professional cutting knife
cutting length (mm)	0,0 mm
cutting width (mm)	37 mm
frequency range (Hz)	50-60 Hz
mains / battery operation	Mains and battery operation
motor	6500 rpm.
on/off switch	ja
operating time (h)	2 h
operating time (min)	120 min.
operating voltage (V)	220-240 V
weight without cable (g)	173 g
Contents (pcs.)	1
weight	173 g

Usage manual

Usage manuals for download

Download

Description: 1 Cutting head 2 Side lever for adjusting the cutting head 3 ON/OFF switch 4 LED indicator (Blue/Red charging) (Green/Off is charging) 5 Combs (6 pieces: 1.5/3/4.5/6/10/13mm) Using and charging the battery without charging station: The device contains a lithium battery. When the device is delivered, it is not yet fully charged. fully charged. You should therefore fully charge the battery before using it for the first time. Make sure before charging, make sure that the mains voltage matches the voltage specified on the device. on the device. Connect the supplied adapter to the mains and then directly to the device. The battery only reaches its full power capacity after several charging cycles. During the charging process, a BLUE/RED indicator light is illuminated. When the battery is fully charged fully charged, the light goes out or lights up green. Charging the battery as long as it is not yet (completely) empty has no effect on the performance of the device. However, we recommend that you completely discharge the battery from time to time and then and then fully charge it again from time to time to prolong the battery life. - Lay the power cord so that no one can trip over it. - Keep the cable, the device and the adapter away from hot surfaces. Charge with a charging station. If included! Make sure that the charging station is placed on a level surface. Connect the supplied adapter to the charging station. Then insert the adapter plug into a functioning socket. working power outlet. Place the switched-off device in the charging station. Switching the device on and off. The device is switched on or off with the on/off switch. (2) Adjusting the cutting length. The cutting head can be adjusted to different lengths with the side adjustment lever (2). 0.5/1.5/2.5/3.5 mm. Adjustment of the cutting length by means of attachment combs: The attachment combs can be placed on the cutting head for different cutting lengths. on the cutting head for different cutting lengths. They are supplied with the unit in the sizes 1.5/3/4.5/6/10/13 mm supplied. (5). They are placed on the unit by means of a magnet in the attachment comb. Cleaning and care. To maintain the optimum cutting performance of the unit, you should regularly maintain the unit. It is best to clean and oil the device daily. - Switch off the device and disconnect it from the mains. Remove the comb attachment from the cutting head if it is being used. Remove all hair and other debris with the brush provided. Carefully remove the cutting head from the device. (If possible) Oil the cutting head; if you use the unit regularly, we recommend that you do this before each use. before each use. Oil all parts of the cutting head that come into contact with each other. Use only the special oil supplied with the device (do not dilute it, it will not hinder the running of the cutting head). of the cutting head). Health hazard due to maintenance oil! Store the filled oil bottle out of reach of children. Do not swallow! Avoid eye contact. Dispose of empty. You can use a slightly damp (not wet) cloth to clean the device housing. Do not use aggressive or abrasive cleaning agents to clean the device. If the cutting head picks up less hair after some time, you can replace it with a new original cutting head. replaced with a new original cutting head (available as a spare part from EFALOCK). Cleaning of the cutting head/replacement of the side lever and/or its stepless adjustment Step 1: Loosen the two screws counterclockwise and remove the cutting blades. cutting blades. Leave the plastic part including the spring in place. Step 2: Unscrew the right screw only. This will lock the nut in place so that you can can loosen the side lever screw without it turning. Step 3: Remove the side lever screw by turning it counterclockwise and put it back in its place. and place it next to the device. Step 4: If you want to remove the click system to be able to work continuously, remove the part you see circled. Be sure to keep this one! Step 5: Replace the side lever and make sure it is set to the correct tension. is set to the correct tension. Test this by moving the side lever up and down. move it. This will vary from person to person, but make sure it is not too tight or too loose. Step 6: Now you can loosen the right screw back counterclockwise. Step 7: Oil the blades where indicated. Step 8: Replace the blades by tightening the screws clockwise. Do not tighten them completely yet, because you still need to check if the blade is straight and how short it needs to be adjusted. Set the blades short and straight, and then tighten the screws. tighten the screws. Make sure the blades stay straight! Storage. Store the device only in a charged state if you will not be using it for a longer period of time. for a longer period of time. Keep the device in a cool and dry place and make sure that the device is protected from dust and other environmental influences. and other environmental influences.

General warnings

CAUTION!
Electrical shock:
- Unplug the appliance immediately after use.
- Keep the appliance away from moisture, water and other liquids.
- Do not use the appliance in the bath, in the shower, over a sink filled with water, or with wet hands.
- Do not immerse the appliance in water or other liquids. Do not touch an appliance that has been in contact with water - unplug immediately.
- The appliance must be unplugged for cleaning, care and maintenance.
- Do not use the appliance if the connecting cable
is damaged. Immediately disconnect the appliance from the mains and
inform EFALOCK customer service.
WARNING:
Do not use this appliance near bathtubs,
washbasins or other vessels containing
water.
Small parts ingestion:
- Keep the appliance out of reach of children. Also, keep
3
German
the packaging material, such as foil, away from children
.
Property damage and personal injury:
- Never leave the appliance unattended when it is turned on.
- Caring supervision is required when the appliance is used with / for /
or near children or disabled persons.
- Do not use replacement parts that are not recommended
or sold by the vendor.
- If the unit is not working properly, has been dropped,
damaged, or dropped into water, do
not attempt to repair the unit yourself. Repairs should only
be made by an authorized service center.
- Never allow the product to come into contact with chemicals, hair dye or hair
color.
- Never attempt to remove dust or foreign objects from inside the unit with a
pointed object.
- Keep the power cord away from hot surfaces.
CAREFUL!
- There is a risk of injury from the cutting head.
- Before each use, check that the blades are aligned
and not overlapping to prevent injury.
- Never reach into the cutting head when the unit
is turned on.
- The cutting head is a precision part. Protect it from
damage and dust.
NOTES!
▷ Persons (including children) who are unable to use
this appliance safely because of their physical, sensory or
mental capabilities, or because they are inexperienced or unfamiliar with
this appliance, should not use this appliance without supervision or instruction
by a responsible person. Children should be supervised to
ensure that they do not play with the appliance.
▷ For additional protection, it is recommended that a residual current device
(RCD) with a rated trip current of not more than 30 mA be installed in the bathroom
circuit. Ask your installer for advice.