CLASSIC STYLE
Hair trimmer
Lightweight, handy & powerful!
- mains / battery operation
- Operating time: up to 90 min. | Charging time: 90 min.
- Motor: up to 6500 rpm, microprocessor control, overheating protection
- easy Click - quick-change blade, professional cutting blade
- ZERO blade - cutting length adjustment: 0.0 to 0.3 mm
- weight: 115 g
- Accessories: comb attachments (1, 2, 3 mm), cleaning brush, oil, power supply
- Packaging content: 1 piece(s)
Lightweight, handy & powerful - specially designed for precise contouring of the beard, neck and ear area. The ZERO blade allows a cut close to the skin. With EASY CLICK quick-change blade.
Features:
- Mains/battery operation
- Battery: high-performance lithium Stage 1 battery without memory effect
- Operating time: up to 90 min.
- Charge time: 90 min.
- Motor: up to 6500 rpm, microprocessor control: smooth running regardless of battery charge level - no overcharging of the battery, overheating protection
- Cutting set: Easy Click - quick-change blade, professional cutting blade, extremely sharp, low wear, minimal heat generation
- Cutting head width: 41 mm
- Cutting width: 37 mm
- ZERO BLADE - for close-to-skin cuts 0.0 mm, cutting length adjustment: 0.0 to 0.3 mm
- Handling: ergonomic, low vibration, optimally balanced
- LED indicator during mains operation
- Weight: 115 g
- Mains operation: 220-240 V | 50-60 Hz
- Accessories: comb attachments (1, 2, 3 mm), cleaning brush, oil, power adapter
| battery included in delivery | Lithium Stage-1 Battery |
|---|---|
| battery model | high performance lithium stage 1 battery without memory effect |
| battery operation | ja |
| charging time (h) | 1,5 h |
| charging time (min) | 90 min. |
| colour | black |
| cord length (m) | 1,5 m |
| cord type | Mains cable |
| cutting blade | asy Click - quick change blade, professional cutting knife |
| cutting length (mm) | 0,0 - 0,3 mm |
| cutting width (mm) | 37 mm |
| frequency range (Hz) | 50-60 Hz |
| mains / battery operation | Mains and battery operation |
| motor | 6500 rpm, microprocessor control |
| on/off switch | ja |
| operating time (h) | 1,5 h |
| operating time (min) | 90 min. |
| operating voltage (V) | 220-240 V |
| weight without cable (g) | 115 g |
| Contents (pcs.) | 1 |
| weight | 115 g |
Usage manuals for download
Description:
1 Cutting head
2 Side lever to adjust the cutting head
3 ON/OFF switch
4 LED indicator (Blue/Red charging) (Green/Off is charging)
5 Combs (6 pieces: 1.5/3/4.5/6/10/13mm)
Use and charge the battery without charging station:
The device contains a lithium battery. When the device is shipped, it is not yet fully
charged. You should therefore fully charge the battery before using it for the first time. Before charging
make sure that the mains voltage matches the voltage
specified on the device.
Connect the supplied adapter to the mains and then directly to the device. The
battery will reach its full power capacity only after a few charging cycles.
During charging, a BLUE/RED indicator light will be on. When the battery is fully
charged, the light goes out or turns green.
Charging the battery while it is not yet (completely) empty does not affect the
performance
of the device. However, we recommend that you fully discharge the battery from time to time and then
fully charge it again to extend the life of the battery.
- Route the power cord so that no one can trip over it.
- Keep the cord, device and adapter away from hot surfaces.
Charge using a charging cradle. If included!
Make sure the charging station is on a level surface. Connect the
included adapter to the charging station. Then plug the adapter plug into a
working electrical outlet. Place the switched-off device in the charging station.
Switch the device on and off.
The device is switched on or off with the on/off switch. (2)
Adjusting the cutting length.
The cutting head can be adjusted
to different lengths using the side adjustment lever (2): 0.5/1.5/2.5/3.5 mm.
Adjusting the cutting length using attachment combs:
The attachment combs can be attached to the cutting head
for different cutting lengths. They are supplied with the unit in sizes 1.5/3/4.5/6/10/13 mm
. (5).
These are attached to the unit using a magnet in the attachment comb.
Cleaning and maintenance.
To maintain the unit's optimal cutting performance, you should regularly maintain the unit.
It is best to clean and oil the unit daily.
- Turn off and unplug the unit.
Remove the comb attachment from the cutting head, if used.
Remove all hair and other debris with the brush provided.
Carefully remove the cutting head from the unit. (If possible)
Oil the cutting head; if you use the unit regularly, we recommend that you do this before
each use. Oil all parts of the cutting head that come into contact with each other.
Use only the special oil supplied with the unit (do not dilute it, it will not hinder the running
of the cutting head). Health hazard due to maintenance oil! Store the filled oil bottle
out of reach of children. Do not swallow! Avoid eye contact. Dispose of empty.
You can use a slightly damp (not wet) cloth to clean the device housing.
Do not use aggressive or abrasive cleaning agents to clean the device.
If the cutting head picks up less hair after some time, you can
replace it with a new original cutting head (available as a spare part from EFALOCK).
Cleaning the cutting head/replacing the side lever and/or its stepless adjustment
Step 1: Loosen the two screws counterclockwise and remove the
cutting blades. Leave the plastic part in place, including the spring.
Step 2: Unscrew the right screw only. This will lock the nut so you
can unscrew the side lever screw without it turning.
Step 3: Remove the side lever screw by unscrewing it counterclockwise
and place it next to the unit.
Step 4: If you want to remove the click system so you can work continuously,
remove the part you see circled. Save this!
Step 5: Replace the side lever and make sure it is back to the
correct tension. Test this by
moving the side lever up and down. This varies from person to person, but make sure it is not too tight
or too loose.
Step 6: Now you can loosen the right screw again counterclockwise.
Step 7: Oil the blades where indicated.
Step 8: Replace the blades by tightening the screws clockwise.
Don't tighten them all the way yet, because you still need to check if the blade is straight and how
short it needs to be adjusted. Adjust the blades to be short and straight, and then tighten the
screws. Make sure the blades stay straight!
Storage.
Store the unit only in charged condition if you
will not use it for a long time. Keep the device cool and dry and make sure that the device is protected from dust and
other environmental influences.
CAUTION!
Electrical shock:
- Unplug the appliance immediately after
using it.
- Keep the appliance away from moisture, water and other
liquids.
- Do not use the appliance in the bath, in the shower, over
a sink filled with water, or with wet
hands.
- Do not immerse the appliance in water or any
liquid. Do not touch an appliance that has come into contact
with water - unplug it immediately.
- For cleaning, care and maintenance, the appliance must be disconnected
from the mains.
- Do not use the appliance if the connection cable
is damaged. Immediately disconnect the appliance from the mains and
inform EFALOCK customer service.
WARNING:
Do not use this appliance near bathtubs,
washbasins or other vessels containing
water.
Swallowing of small parts:
- Keep the appliance out of reach of children. Also
keep the packaging material, such as foils away from children.
Property damage and personal injury:
- Never leave the appliance unattended when it is turned on.
- Caring supervision is required when the appliance is used at / for /
or near children or disabled persons.
- Do not use replacement parts that are not recommended
or sold by the vendor.
- If the unit is not working properly, has been dropped,
damaged, or dropped into water, do
not attempt to repair the unit yourself. Repairs should only
be made by an authorized service center.
- Never allow the product to come into contact with chemicals, hair dye or hair
color.
- Never attempt to remove dust and foreign objects from inside the unit with a
pointed object.
- Keep the power cord away from hot surfaces.
CAUTION!
- There is a risk of injury from the cutting head.
- Before each use, check that the blades are aligned
and do not overlap to prevent injury.
- Never reach into the cutting head when the unit is
powered on.
- The cutting head is a precision part. Protect it from
damage and dust.
NOTES!
▷ Persons (including children) who, because of their physical, sensory
or mental capabilities, or lack of experience or knowledge, are unable
to use this appliance safely should not use this appliance without supervision
or instruction by a responsible person. Children should
be supervised to ensure that they do not play with the appliance.
▷ For additional protection, the installation of a residual current device
(RCD) with a rated trip current not exceeding 30 mA in the bathroom
circuit is recommended. Ask your installer for advice.
More information about the product in the catalogue
